2024 Exmark Lazer Z Diesel LZS80TDYM604W0
- Year 2024
- Make Exmark
- Model Lazer Z Diesel
- Engine Model: 3TNV80FT | Series: TNV | Engine Spec: ZMTR1
2024 Exmark Lazer Z Diesel LZS80TDYM604W0
2024 Exmark Lazer Z Diesel LZS80TDYM604W0
When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.
Features may include:- Improved Handling
- Fuel Capacity
- Tire Size / Ground Speed
- On-Board Intelligence
- Reduced Maintenance and Service
- Hydraulic Deck Lift
- Productivity
- Leading Zero-Turn. Strong Warranty.
Engine
Air Filter
Heavy-duty canister air filtration system with electronic vacuum sensor
Displacement
1267
Engine Manufacturer
Yanmar
Engine
Model: 3TNV80FT | Series: TNV | Engine Spec: ZMTR1
Engine Torque
2,600 RPM
Fuel System
Fuel Type
Electronically Governed IDI Turbo Diesel | Diesel
PTO
PTO Type
Engagement: Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drivetrain
Steering
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Drive System
Hydro-Drive | Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler. | Drive Wheel: Release Allows unit movement without engine running.
Brakes
Parking Brake
Lever-actuated internal wet disc brake.
Wheels & Tires
Tires, Rear Specification
26x12-12, 6ply
Tires, Front Specification
26x12-12, 6ply
Wheels, Caster Specifications
15 x 6.0-6, smooth-tread, semi-pneumatic.
Electric
Electrical
12-volt battery with 55-amp alternator.
Operational
Operating Speed
Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse. | Blade Tip Speed: Approximately 17,600 fpm
Chassis
Frame Type
Tractor: Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Dimensions
Cutting Width
60"
Height
Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 71.8 in. (182.4 cm)
Length
Blades at 20.50" | 96.43 in. (244.9 cm)
Width
72.8 in. (184.9 cm)
Weights
Curb Weight
1915 lbs
Capacities
Fuel Capacity
12-gallon (45.4-L), side fuel tanks
Features
Features
Onboard Intelligence: RED Technology | 12-volt plug-in, engine hour meter and cup holder | UPC: 193308000770 | Fuel Indicator: Yes - mechanical float type | Carb Compliant | Deck Lift: Hydraulic | Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Spindle Type
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver. | Caster Forks: .50" thick caster yoke arms.
Seat Type
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Construction Material, Deck
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.